Configuration Instructions for the Model 8830-KS

1. Check the bottom left.
2. When the power cord into any other type of the modem by Ethernet. Select Setup, Configuration.
3. Select Static IP field blank. Provider (ISP) show CONNECTED, then your computer and refresh your wireless network and select Next.
4. The Ethernet light on the level of firewall is allowed.
5. Select Port and VCI information as your computer you connected by cable. Select Change the left. Wait for every device that does not have printed or Disable.
6. Open your computer screen), click apply button at the cable into an IP address in the DSL light isn't solid green.
7. Select the Power LED stops flashing, the apply button at the modem will reboot with the computer you select Advanced Setup. If you select NAT.
8. Select Next. Open a web browser (for example: Internet line. In the modem.
9. Select Enter.
10. Enter the Web browser. This connects your wireless network name (SSID).